FEATURES-USE

• protects walls and floorsconcrete, cement, asphalt (does not dissolve) in garages, workshops, parking lots, sheds, barns, industrial floors industrial floors.
• is the ideal paint for maintenance of painted floors(with epoxy or polyurethane paints) which, due to their chiaroscuro chemicalcan cause adhesion problems when using conventional paints.
• has all the advantages of dispersion paints: low odour, easy to cleanand at the same time those of epoxy paints epoxy paints: excellent adhesionceand durability.
• has CE mark
• Kitchens & Food industry certificatebavailable at
• reaction to fire : classA2fl-s1
• IAQor indoor air emission: A+
• high chemical resistance: sbehaves perfectly well with occasional contact with petrol, vegetable and mineral oils, soda ash and 10% sulfuric acid.

SUBSTRATES AND SYSTEMSPAINT

STELFLOOR EPOXY HYDRO should be applied to clean, dry, hard and consistent substrates.

Finish

Primer coat:

• On new, consistent concrete: the first coat should be diluted 10% with water.

Finishing coat:

• Apply 2 coats of STELFLOOR EPOXY HYDROundiluted or diluted up to 5% with water.
• Put 2 days for light traffic and 5 days for heavy traffic.

Note

• The practical working life of STELFLOOR EPOXY HYDROis 1h30 and must not be exceeded, even if the product has not thickened in the packaging. Otherwise, its chemical and mechanical properties would be adversely affected.
• Peferably work with the product if the substrate and/or ambient temperature is at least 14°C.
• The moisture contentcontent of cement-based must not exceed 4% (measured using the Carbide method). The moisture contentof calcium sulfate-based soils (anhydrite) may not exceed 0.5%.(measured using the Carbide method).

DIRECTIONS FOR USE

Dryingtime: Dry 5 hours | Recoatable 15 hours

Application and thinning: Brush and roller. Ready to use.

Cleaning equipment : With waterat directly after use.(cleaning of equipment is no longer possible if the productdry)

COMPOSITION

Binder : Epoxy resin and nitrogen-containing polymers.

VOC: This product(A+B)contains a maximum of 5g/lVOC.

Appearance Semi-gloss.(45±10GU@60° volgens NF EN ISO 2813)

STORAGE-SHELF LIFEN

Store preferably frost-free and covered in original, unopened packaging. at temperatures between 5°C and 35°C.At least 12months in mentioned conditions.