Trimetal Silvatane PU Acrylic Satin colorless

FEATURES-USE

• recommended for embellishing and protecting interior woodwork.
• is totally colorless, non-yellowing and enhances the natural appearance of wood.
• has good mechanical mechanical resistance (wear, resistanceresistance) and chemical resistance (stain resistance).
• is odorless and fast-drying, allowing several coats to be applied per day.
• IAQ or emission in the'airrr: A+

SUPPORTS AND SYSTEMSPAINT

SILVATANE PU ACRYL SATIN should be applied to completely dry, sound, clean wood or suitably prepared surfaces.

Finish SILVATANE PU ACRYL SATIN is applied in one to three coats.

• Bare wood: 3 coats.
• Previously varnished varnished wood: 1 to 2 coats.
• As a finish over interior acrylic or vinyl paints: 1 or 2 coats.

Note : For SILVATANE PU ACRYL SATINit is imperative to thoroughly mix the packaging by hand until obtaining a homogeneous before and during application.

DIRECTIONS FOR USE

Dryingtime: Dry 20 minutes | Recoatable 4 hours

Application and thinning:Synthetic longbristle brush / Mohair, felt or modacryl roller. Ready to use.

Cleaning equipment : With water.

COMPOSITION

Binder : Resins acryl-polyurethane resins.

VOC: This product contains a maximum of 100 g/l VOC.

Appearance : Transparent, satin finish.

STORAGE-SHELF LIFEN

Store preferablyprotected from frost and covered in unopened at temperatures between 5°C and 35°C.At least 24 months under specified conditions.