Trimetal Globacryl Facade White

Grouped product items
Product name Qty
Trimetal Globacryl Facade White 1l
€38.25 (-25%) €28.69 i.e. €28.69 per liter
In Stock
Trimetal Globacryl Facade White 5l
€167.79 (-33%) €113.26 i.e. €22.65 per liter
In Stock
Trimetal Globacryl Facade White 10l
€312.18 (-32%) €210.72 i.e. €21.07 per liter
In Stock

Calculate the right quantity of paint

You know the dimensions of your room

Trimetal GLOBACRYL FACADE is a satin-finish, 100% acrylic paint for use on exterior walls.

Excellent weather resistance, good coverage, self-washing.

  • Waterproof and vapor permeable.
  • Self-washing
  • Contains an additive that promotes adhesion
  • Retains its original color without fading

Features and benefits

  • Suitable for protecting and decorating all exterior wall surfaces: brick, cement, concrete or any other mineral substrate.
  • Impervious to water run-off and permeable to water vapour (sd <0.2 m), for a highly decorative finish.
  • Self-washingeasy to maintain, prolongs the life of treated materials.
  • Thanks to its pigments and fillers retains its original color without fading.
  • Contains an additive that promotes adhesion. It can therefore be applied directly to an old enamelled façade.
  • Resistant to wet rubbingDIN EN 13300, class 1.
  • High covering power (Best in class against comparable facade paints).
  • Very easy to apply .
  • Non-saponifiable
  • Slows carbonation

SUBSTRATES AND PAINT SYSTEMS

GLOBACRYL FAÇADE can be applied to all sound, dry, coherent exterior hydraulic substrates, after appropriate preparation according to the substrate to be treated.

Substrate preparation

Unpainted surfaces:
- Remove loose particles and efflorescence by brushing.
- Wash surfaces with a high-pressure water jet.
- If necessary, treat moss with POLYFILLA PRO S705; allow to act for at least 24 hours (repeat treatment if necessary). Brush dry to remove any residues of greenery, mould and algae.
- Rinsing is not necessary, as it will prolong the effect.
- Repair cracks and crevices with Polyfilla Pro X300.
- Defective joints will be hollowed out and replaced.
- Apply a coat of GLOBAPRIM FIX or GLOBAPRIM HYDROFIX or GLOBAPRIM HYDRO to increase the durability of the overall system.
- Cellular concrete blocks: apply a coat of GLOBAPRIM HYDRO.

Previously painted surfaces in good condition:
- Wash surfaces with a high-pressure water jet.
- If necessary, treat with POLYFILLA PRO S705; allow to act for at least 24 hours (repeat treatment if necessary). Brush dry to remove any residues of greenery, mould and algae.
- Rinsing is not necessary, as it prolongs the effect.
- On new, absorbent or chalking surfaces, apply GLOBAPRIM HYDROFIX.
- On existing waterborne paints (acrylic or latex) in good condition, apply GLOBAPRIM HYDRO
- On old alkyd-based paints (enamelled facade), apply GLOBACRYL FAÇADE directly as an adhesion primer.

Previously painted surfaces in poor condition:
- Remove loose coats.
- Wash surfaces with a high-pressure water jet. If necessary, treat foams with POLYFILLA PRO S705; allow to take effect for at least 24 hours (repeat treatment if necessary). Brush dry to remove any residues of greenery, mould and algae.
- Rinsing is not necessary, as it will prolong the effect.
- Repair cracks and crevices with Polyfilla Pro X300.
- Defective joints should be hollowed out and replaced.
- Apply GLOBAPRIM HYDROFIX to new, absorbent or floury surfaces.

DIRECTIONS FOR USE

Drying time at 20°C and 60% R. H.

  • Dry: 1 h
  • Recoatable: 6h


Application conditions

  • Substrate temperature: Min. 10°C
  • Ambient temperature : Min. 10°C
  • Max. relative humidity : 80%

Application and dilution

  • Brush and roller
    Ready to use

  • Equipment cleaning
    With water

TECHNICAL CHARACTERISTICS

  • Aspect
    Satin (3 to 7 GU at 60° and 5 to 15 GU at 85°)

  • Shades
    White + 3 bases: AW, AM and AC

  • Coverage
    Good. A single pass with an airless spray gun is enough to obtain a covering coat.

  • Weather resistance
    Good weather resistance
  • Packaging
    1 L - 5 L - 10 L

  • Tinting
    Using the TRIMETAL ACOMIX tinting machine.

  • Density at 20°C
    1.35 ± 0.05

  • Theoretical coverage
    11 m2/l depending on substrate roughness and porosity

More Information
DestinationFacade
Aspect & ShineMat
TypeFinish
VOC< 30 gr/L
Average yield11 m²/L
We found other products you might like!