Mathys Murfill 101 White
Long-lasting, flexible, 100% waterproof protection
Elastic
Waterproof and vapor-permeable
Highly resistant to atmospheric agents in normal and industrial conditions
Protects steel in reinforced concrete against carbonation and corrosion
DESCRIPTION
A semi-thick, flexible, waterproof façade cladding that resists cracking. Its microporous
structure allows the treated surface to breathe. These products are ready-to-use and
easy to apply to any facade. The excellent opacifying power and elasticity of
the "Murfill Waterproofing Coating" range protect your facade from wear and tear,
deterioration and moisture infiltration. In short, facade protection with
waterproofing guarantees.
RECOMMENDED USE
Elastic, waterproof coating for walls and facades.
TECHNICAL DATA
Density (g/cm³): 1.33 - 1.37 g/cm³ (wit)
Gloss level: Semi-matt
Gloss level at 60º: 8-10%
Gloss level at 85º: 13-16%
Dry extract by weight: 60 - 63%
Dry extract by volume: 47 - 50% Density (g/cm³): 1.33 - 1.37 g/cm³ (wit) Gloss level: Semi-matt Gloss level at 60º: 8-10% Gloss level at 85º: 13-16% Dry extract by weight: 60 - 63% Dry extract by volume: 47 - 50%
DRYING TIME AT 20°C/HR 50%
Touchable: 45 minutes
Handling: ± 8 hours
Recoatable: 24 hours
Through-hardening: ± 2 days
RECOMMENDED WET FILM THICKNESS
300 μm (cons. 400 g/m²)
RECOMMENDED DRY FILM THICKNESS
140 μm (cons. 400 g/m²)
THEORETICAL CONSUMPTION
Interwoven in combination with fleece (> 1.3 kg/m²).
- 300 - 600 g/m² per coat depending on application and substrate.
SURFACE PREPARATION
Previously painted surfaces (in good condition): apply directly after thorough brushing. If the
substrate is chalking, recondition the base with Primer 44HS or Pegafix if
the old paint (acrylic paint or Murfill Waterproofing Coating) is attacked by the
solvents in Primer 44HS. New or unpainted substrates: on porous materials, apply
a coat of Primer 44HS or a coat of Pegafix. On smooth,
non-absorbent substrates, apply a coat of Pegalink (white) or a coat of Noxide (at
excluding white), diluted with 20% water. To isolate stains, graffiti and/or for very fast
coverage on all substrates, use Zinsser Bulls Eye 123 or
123 Plus primers, or Cover-Stain. Cracks < 0.5 mm should be sealed with Murfill
Waterproofing Coating. Cracks > 0.5 mm should be filled with Elastofill or Mur-Filler.
Active cracks should be bridged with Murfill.
USE PRECAUTIONS
Stir well before use to ensure homogeneity.
APPLICATION CONDITIONS
Temperature min. 5°C / R.
H. max. 80%.
APPLICATION & DILUTION: BRUSH
Use undiluted in thick coats.
APPLICATION & THINNING: ROLLER
Use undiluted and in thick coats.
APPLICATION & THINNING: AIRLESS SPRAYGUN
APPLICATION & THINNING: PNEUMATIC SPRAYGUN
Not possible.
CLEANING EQUIPMENT / SHOES
Water.
REMARKS
For warranty possibilities on this system, please contact
Technical Service.
SAFETY DATA
VOC content: 25 g/l max.
VOC category: A/i
VOC limit: 140 g/l (2007) / 140 g/l (2010)
Safety notes: See safety data sheet and information on
the label.
LIFETIME
2 years minimum from production date (indicated on can) for unopened
cans, stored in dry, well-ventilated premises, away from direct sunlight, and at
temperatures between 5 and 35°C.