Highly protective oil for exterior woodwork 2043
Colorless oil for protecting wooden structures exposed to the elements.
Penetrates deeply, invigorates wood, protects against humidity, delays the appearance of gray and cracks and cracks if regularly maintained; lets wood take on its patina and age nobly.
Naturally, exterior wood darkens in appearance.
Does not contain synthetic UV filters or other fungicides/insecticides.
Suitable for all rough, sawn, planed or sanded woods, such as pergolas, carports, patio furniture, formwork, etc.; not suitable for joinery. not suitable for exterior joinery such as windows and doors,...
It is important that wood is shaped to match its constructional protection.
Stagnant water should be avoided, standing wood should be closed off, etc.
Wood exposed to mildew or already affected should be impregnated with a fungicide.
Oil that does not penetrate the wood can leave shiny spots that fade with weathering.
Instructions for use
- Substrate preparation he substrate must be dry (wood moisture content less than 12%), clean, free of dust and grease.
and free from grease stains (degrease with BIOFA 0500 thinner if necessary).
Remove any old paint.
Sand garden furniture with 180-grit sandpaper. - a. Application to pergolas, cladding, etc.: apply 3 thin coats by brush, roller or spray 16 to 24 hours apart.
Observe indicated quantities.
Beware of cutting surfaces, standing wood, etc.
b.Application on furniture, toys, etc. : Apply high-protection oil with a brush (flat brush, synthetic or mixed bristles), velvet roller or spray gun in three thin coats.
If necessary, sand between coats with 180 or 240.
Avoid product build-up in corners and lath joints.
Spray data:
Cup: 1-1.5mm nozzle, 2-2.5bar pressure;
Airless: nozzle 0.23-0.28mm, pressure 4 bar on 80 bar.
Important: testfirst.
Mix pots with different fillers.
Avoid application in directwood becomes sticky (a skin forms on the surface before penetration into the wood).
During application and drying, ensure good ventilation and air circulation.
Treated furniture: allow 48 h to harden before first use. - Cleaning equipment: wUse BIOFA 0500 thinner immediately after use.
- Maintenance of pergolas, cladding: for long-lasting protection, wood should be treated every wood should be treated every 1 to 3 years, depending on exposure and weathering; horizontal woodwork should be treated annually.
Garden furniture care: hthinly coat and polish with a cotton cloth after about 30 minutes.
Drying
The oil dries in 12 to 24 hours (at 20°C and 50-55% relative humidity).
Do not use furniture before 48 hours.
Composition
Linseed oil, aliphatic hydrocarbons, tall oil ester, wood oil, castor oil, rosin ester, microcire, cobaltehexanoate, zirconium and zinc driers, antioxidant.
Consumptio n
Pergolas, cladding: 30 to 50 ml/m² or 20 to 30 m²/l. Rough sawn wood absorbs more.
Furniture: 20 to 30 ml/m² or 30 to 50 m²/l
Yield depends on wood porosity.
Storage
Store in a cool, dry place. A skin may form on opened packages, which must be removed before re-use. Close containers tightly.
Safety instructions
Allow cloths soaked in thinner to dry on non-flammable surfaces (risk of self-ignition). in water, or store in tightly closed metal containers. The product is not inherently flammable.
Contains cobaltbis(-ethylhexanoate). May cause allergic reactions.
When heated or sprayed, diluent/air mixtures may be explosive.
Natural products should also be kept out of the reach of children.
Do not breathe aerosols or vapours.
Use only in well-ventilated areas.
When applying, observe safety rules for skin protection.
Wear a fine dust mask when sanding.
The use of natural raw materials may give off a characteristic odour.
Recycling
Do not dispose of residues down the drain.
Liquid product should be disposed of in paint containers or in accordance with local regulations.
Small quantities and dry rags can be disposed of in household waste.
Empty, dry packaging should be disposed of at a waste disposal center.
Uncleaned packaging should be treated in the same way as the product.