V33 High Protect Chalet Stain is available to buy in increments of 1
Want to add value to your garden chalet while protecting it from damage? High Protect woodstain is the solution for preserving the wood of your chalet in summer and winter, whatever the weather.
Recommended for cottages and garden sheds. Also suitable for shutters, gates, fences, etc.
On all types of European or exotic wood, new or to be renovated: oak, softwood, larch, Douglas fir, red cedar...
PROPERTIES
HIGH RESISTANCE
Long-lasting protection against UV and
climatic aggressions (sun, rain, snow,
frost, wind...).
Water-repellent: enhanced waterproofing.
LASTING BEAUTY
A velvety satin finish, closer to the natural look of wood.
Microporous: lets wood breathe.
EASY APPLICATION
Compatible with all old woodstains and glycerol finishes.
Non-drip texture for easy, drip-free application
vertical application.
Quick-drying.
WHAT WE ALSO LIKE ABOUT THIS WOODSTAIN
Formulated with plant-derived resins, oils and wood fibers, neither petrochemical nor organic. The formula contains 25% biobased carbon out of total carbon, in accordance with NF EN 16640.
Between coats: 3h Thorough drying: 12h
YIELD 12m2/l
0.75L - 2.5L
Light satin
Cleaning with water
Exterior
How to use
TOOLS
As desired or depending on project configuration :
Brush
Roller
Spray gun
PREPARATION
Wood must be bare, clean, dry and not greasy. Always round corners and sharp edges to ensure even coverage.
Rough wood: sand with 150-grit sandpaper to obtain a smooth surface and remove dust. Protect wood against insect attack or fungal growth with V33 Universal Treatment or Garden Wood Treatment.
Rough DIFFICULT WOOD (exotic, oak, larch, oiled or greasy...): dilute the 1st coat with 10% water and apply an undiluted 2nd coat (avoid too thick an application). On oily wood, degrease first with acetone.
FOR WOOD THAT HAS ALREADY BEEN LASURED: brush to remove loose parts, then sand with 150-grit sandpaper to obtain a smooth surface and remove dust.
APPLICATION
Ideal application conditions: between 12 and 25°C in dry weather.
Stir Chalet High Protect vigorously before use with a long, wide stirring rod, paying particular attention to the bottom of the pot, so as to homogenize the product.
Apply one coat in the direction of the wood grain, making sure to cover all hollows and edges. Leave to dry for 3 hours. Apply a 2nd coat in the same way and leave to dry for 12 hours.
Remove as much product as possible from tools after use. Do not dispose of residues and wash water/solvents in sinks, toilets, sewers, garbage garbage cans... afin to avoid release into the environment.
TIPS
For spray application, allow for dilution (max 10% water) and application in 3 thinner coats.
The colorless variant is for maintenance use only on wood that has already been stained or tinted, or to deconcentrate other shades in the color chart.
Not suitable for use on thermo-heated, heat-treated or acidic wood.
The color, porosity, species and age of the wood can influence the final shade of the substrate. Always test on an inconspicuous area.
Sand with 240-grit sandpaper between 2 coats if the surface feels rough to the touch after the 1st coat.
Avoid wasting woodstain: estimate the amount of woodstain you need.
Close unfinished jars so you can reuse the woodstain. Reusing woodstain is a good way of reducing the environmental impact of products over their entire life cycle. Close packaging after use.
When using by spraying, be sure to wear appropriate gloves and clothing, and avoid breathing mists.
8-YEAR WARRANTY
The 8-year warranty covers :
NEW or RESTORED WOODS of common species, in accordance with the preparation
preparation and application.
EXPOSURE: on vertical woodwork only. South and South-West exposure: apply
3 coats.
The guarantee is limited to reimbursement of the product (on presentation of the can and sales receipt) and concerns only the appearance of the stain.
