TOOLS
- 3-5mm short-haired brush or roller
- Cloth
PREPARATION
Wood must be bare, clean and dry.
- Rough or oiled wood: sand lightly with fin sandpaper and remove dust or effect with V33 Cleaner Degreaser.
- VARNISHED or LASURED WOOD: sand and/or strip and dust to restore your untreated wood.
APPLICATION
- Ideal application conditions: between 12 and 25°C, in dry weather.
- Ready-to-use product.
- Shake can vigorously before and during use. Pour Classic Oil into a wide-mouth container.
1st application: impregnate the wood generously, applying the oil with a brush or roller. After 20 minutes, wipe off any excess with a lint-free chiffon. The appearance should be matte after wiping. Leave to dry for 6 hours, then apply a2nd coat using the same procedure. Allow to dry for 24 hours. Check drying before using your furniture.
Maintenance: regularly during the season, or as soon as your wood becomes dull or bleached, apply a coat (local or general) of Classic Oil as described above.
Remove as much oil as possible from tools after use. Do not dispose of residues or wash water/solvents down the sink, toilet, drain, garbage can... afin to avoid release into the environment.