Bateau Varnish offers optimum protection for wood subjected to the harshest conditions. Polyurethane resin ensures high resistance to UV rays, extreme climates and sea spray.
Bateau 0,75L Amber Brillant
€34.61 (-10%) €31.15
Bateau 0,75L Amber Brillant is available to buy in increments of 1
Features
DESTINATION
Can be applied to all wood species, European and exotic.
Recommended for exterior woodwork subject to harsh exposure: boat decks, gates, seaside house frames, decks, balconies, etc.
PROPERTIES
- Boat varnish, based on polyurethane resins and UV stabilizers, provides optimum protection for exterior woodwork exposed to marine climates and strong sunlight.
- Its formulation makes it perfectly waterproof and resistant to sea salts.
- Its high resistance to abrasion means it can be used in high-traffic outdoor areas: terraces, balconies, outdoor staircases, etc.
- V33 boat varnish follows the movements of the wood to avoid film breakage. Special yachting varnish, "marine" quality.
- Highly resistant to seawater, sun and sea spray. Resistant to the most aggressive environments (seaside, mountains, etc.).
- Can also be applied to small metal surfaces, even outdoors.
-
BETWEEN COATS: 6H
DRYING TIME: 24h -
YIELD
12m2/l -
0.25L - 0.75L - 2.5L -
Satin
(depending on shade)
Gloss -
Clean with White Spirit -
EXTERIOR
How to use
TOOLS
Brush or spray gun.
PREPARATION
Wood must be bare, clean and dry. Always lightly round the corners of your woodwork with sandpaper to ensure even varnish coverage and optimum wear resistance.
- NEW OR RUGGED WOOD: sand in the direction of the wood grain with 150-grit sandpaper to obtain a smooth surface.
- VARNISHED or LASURED WOOD: sand with 240-grit sandpaper to remove old brittle finishes, then dust off.
- PAINTED WOOD or CHIPPED Varnish: strip with V33 Universal or Special Wood Stripper. Rinse with water and leave to dry for 24 hours. Sand with 240-grit sandpaper and remove dust.
- EXOTIC WOOD or METAL: degrease with acetone.
APPLICATION
Stir well with a chopstick before use.
1. Apply two coats by brush or spray on clean, dry and grease-free wood.
2. Allow the first coat to dry for 6 hours.
3. To achieve a high level of finish, sand lightly between coats with fine sandpaper (240), remove dust carefully and apply the next coat.
TIPS
- Ideal application conditions: between 12 and 25°C in dry weather.
- It is advisable to degrease oily wood before varnishing.
- Slightly round corners with sandpaper to ensure even varnish coverage.
- Apply V33 boat varnish in the direction of the wood grain.
- Avoid over-thicknessing.
- Stretch the varnish well to obtain a perfect smoothness.
SAFETY DATA SHEETS